Cyclone V GX Starter Kit
- Brand: Terasic
- Product Code: Cyclone V GX Starter Kit
- Availability: In Stock
The Cyclone V Starter Kit presents a robust hardware design platform built around the Altera Cyclone V GX FPGA, which is optimized for the lowest cost and power requirement for transceiver applications with industry-leading programmable logic for ultimate design flexibility. With Cyclone V FPGAs, you can get the power, cost, and performance levels you need for high-volume applications including protocol bridging, motor control drives, broadcast video converter and capture cards, and handheld devices. The Cyclone V Starter Kit development board includes hardware such as Arduino Header, on-board USB Blaster, audio and video capabilities and much more. In addition, an on-board HSMC connector with high-speed transceivers allows for an even greater array of hardware setups. By leveraging all of these capabilities, the Cyclone V Starter Kit is the perfect solution for showcasing, evaluating, and prototyping the true potential of the Altera Cyclone V GX FPGA.
* Power Solution |
* Memory Solution |
* Clock Solution |
|
* Capacitive Component Solution | * Analog-to-Digital Converter Solution |
* Low Power Memory Solution | |
* Inductive Component Solution |
Specifications
FPGA Device
Cyclone V GX 5CGXFC5C6F27C7N Device
77K Programmable Logic Elements
4884 Kbits embedded memory
Six Fractional PLLs
Two Hard Memory Controllers
Six 3.125G Transceivers
Configuration and Debug
Quad Serial Configuration device – EPCQ256 on FPGA
On-Board USB Blaster (Normal Type-B USB connector)
JTAG and AS mode configuration supported
Memory Device
4Gb LPDDR2 x32 bits data bus
4Mb SRAM x16 bits data bus
Communication
UART to USB
Expansion I/O
HSMC x 1(voltage levels: 2.5V), including 4-lanes 3.125G transceiver
2x20 GPIO Header (voltage levels: 3.3V)
Arduino header, including analog pins
SMA x 4 (DNI), one-lane 3.125G transceiver
Display
HDMI TX, compatible with DVI v1.0 and HDCP v1.4
Audio
24-bit CODEC, Line-in, line-out, and microphone-in jacks
Switches, Buttons, LED, and 7-Segments
18 LEDs
10 Slide Switches
4 Debounced Push Buttons
1 CPU reset Push Buttons
Four 7-Segments
Micro SD Card Socket
Provides SPI and 4-bit SD mode for SD Card access
ADC
12-Bit Resolution, 500Ksps Sampling Rate. SPI Interface.
8-Channel Analog Input. Input Range : 0V ~ 4.096V.
Power
12V DC input
Block Diagram
Kit Contents
Tags: Development Board, Intel, FPGA, Cyclone V GX Starter Kit, Terasic