The Video and Embedded Evaluation Kit-Multi-touch, Second Edition, on Cyclone® V SoC Development Board (VEEK-MT2-C5SoC) is a comprehensive embedded design environment with everything developers need to create processing-based systems. VEEK-MT2-C5SoC delivers an integrated platform that includes hardware, design tools, intellectual property (IP) and reference designs to develope embedded solutions for a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT2-C5SoC features the Intel Cyclone® V SoC development board with Intel Cyclone® V SX SoC FPGA, and a capacitive 7” TFT LCD with 800x480 resolution which supports 5-point touch and multi-touch gestures. An 8-megapixel digital image sensor with auto focus, ambient light sensor, Gyroscope, Magnetometer, and 3-axis accelerometer makes up the rich feature-set.
The all-in-one embedded solution offered on the VEEK-MT2-C5SoC, in combination with the LCD touch panel and digital image module, provides embedded developers the ideal platform for multimedia applications with unparallel processing performance. Developers can benefit from the use of this FPGA-based embedded processing system utilizing mitigating design risk and obsolescence, design reuse, reducing bill of material (BOM) costs by integrating powerful graphics engines within the FPGA, and by lower costs.
Specification
Cyclone V SX SoC Development Board
SoC Embedded Design Suite Subscription Edition
ARM Development Studio 5 (DS-5™) Intel Edition Toolkit
Hardware-to-software handoff tools
Linux run-time software for application development
SoC hardware libraries for firmware development
Application example
Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
110K LEs, 41509 ALMs
5140 M10K memory blocks
224 18x18 Multipliers
6 FPGA PLLs and 3 HPS PLLs
Configuration Device and USB Blaster Circuit
Active Serial (AS) x1 or x4 configuration (EPCQ256SI16N)
MAX® V CPLD (5M2210ZF256I5N) in a 256-pin FBGA package as the System Controller
Flash Fast Passive Parallel (FPP) configuration
MAX II CPLD (EPM570GM100) as part of the embedded USB-BlasterTM II for use with the Quartus® II Programmer
Memory Devices
One 1,024-Mbyte (MB) HPS DDR3 SDRAM with Error Correction Code (ECC) support
One 1,024-MB FPGA DDR3 SDRAM
One 256-Megabit (Mb) quad serial peripheral interface (QSPI) Flash
One 512-Mb CFI Flash
One 32-Kb I2C serial Electrically Erasable PROM (EEPROM)
One microSD flash memory card
Switches and Indicators
LEDs and displays
Eight user LEDs
One configuration load LED
One configuration done LED
One error LED
Three configuration select LEDs
Four on-board USB-Blaster II status LEDs
One HSMC interface LED
Two UART data transmit and receive LEDs
One power on LED
One two-line character LCD display
Push buttons
One CPU reset push button
One MAX V reset push button
One program select push button
One program configuration push button
Six general user push buttons
DIP switches
One MAX V CPLD System Controller control switch
One JTAG chain control DIP switch
One mode select DIP switch
One general user DIP switch
On-board Clocking Circuitry
Si570, Si571, and Si5338 programmable oscillators
25-MHz, 50-MHz,100-MHz, 125-MHz, 148.50-MHz, and 156.25-MHz oscillators
SMA input (LVCMOS)
Communication Ports
One PCI Express x4 Gen1 socket
One universal HSMC port
One USB 2.0 on-the-go (OTG) port
One Gigabit Ethernet port
Dual 10/100 Ethernet ports
One SDI port (option for SMA connection)
One controller area network (CAN) port
One RS-232 UART (through the mini-USB port)
One real-time clock
Power
14-20 V (laptop) DC input
Mechanical
5.2" × 8.2" rectangular form factor
Capacitive LCD Multi-touch Screen
7-inch TFT LCD with pixel resolution of 800*480
16 million colors (24-bit RGB)
LED backlight
5-point capacitive touch
8-Megapixel Digital Image Sensor
3,264H x 2,448V active pixels with Bayer color arrangement
Programmable frame rate up to 60FPS (1408X792)
Sensitivity 940mV/Lux-sec
Voice Coil Motor for focus control
Ambient Light Sensor
Precise illumination measurement under diverse lighting conditions
Programmable interrupts
16-bit digital output with I2C fast-mode at 400 kHz
Programmable analog gain and integration time
50/60Hz lighting ripple rejection
MPU9250 Nine-Axis Sensors
Accelerometer Features
Digital-output triple-axis accelerometer
Programmable full scale range of ±2g, ±4g, ±8g and ±16g and integrated 16-bit
Self-test
Gyroscope Features
Digital-output X-, Y-, and Z-Axis angular rate sensors
User-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs
Self-test
Magnetometer
- 3-axis silicon monolithic hall-effect magnetic sensor with magnetic concentrator
- Wide dynamic measurement range and high resolution with lower current consumption
- Output data resolution of 14 bit (0.6μT/LSB) or 16 bit (15μT/LSB)
- Full scale measurement range is ±4800μT
- Magnetometer normal operating current: 280μA at 8Hz repetition rate
- Self-test function with internal magnetic source to confirm magnetic sensor operation on end products
Kit Contents
Tags: SoC Platform, Intel, FPGA, VEEK-MT2-C5SoC, Terasic