The UE9 is not recommended for new users or new applications. New applications should consider the newer T7 or T7-Pro over the UE9. The T7 family is generally superior at a lower price.
Production Status: LIMITED
(limited availability) expected through 1Q 2022, as final production
will be completed in 2021. When those units are gone the status will be
NLA (no longer available). Many parts required to build the UE9 have
been discontinued by their manufacturers. Production of the UE9 has
become increasingly difficult and expensive. The T7 is a newer
replacement that is superior in every way including cost.
USB or Ethernet DAQ device with 14 analog inputs (12- to 16-bit), 2
analog outputs (12-bit), 23 digital I/O, up to 2 counters, and up to 6
timers.
USB or Ethernet Multifunction DAQ
The UE9 family was the first LabJack product to incorporate
industrial strength Ethernet, and offers a wide range of capabilities.
It has a long service record of reliability and customer satisfaction,
but new applications should consider the newer T7 or T7-Pro instead.
Hardware Overview
New
applications should consider the newer T7 or T7-Pro over the UE9 or
UE9-Pro. The T7 family is generally superior at a lower price.
Technical Specifications
14 Analog Inputs (12-16 Bits Depending on Speed)
UE9-Pro Adds 24-bit Low-Speed ADC for 20-Bit Effective Resolution
±5 or 0-5 Volt Maximum Analog Input Range
2 Analog Outputs (12-Bit, 0-5 Volts)
23 Digital I/O
Up to 2 Counters (32-Bits Each)
Up to 6 Timers (Pulse Timing, PWM Output, Quadrature Input, ...)
Supports SPI, I2C, and Asynchronous Serial Protocols (Master Only)
Supports Software or Hardware Timed Acquisition
Maximum Input Stream Rate of 50+ kHz (Depending on Resolution)
Capable of Command/Response Times As Low As 1.5 Milliseconds
Built-In Screw Terminals for Some Signals
USB 2.0/1.1 Full Speed Interface
Ethernet 10Base-T Interface
Dual-Processor Design with 168 MHz of Total Processing Power
Electrical Isolation Possible with Ethernet Interface
Wireless DAQ Possible with Ethernet Interface and 802.11 Bridge
No Power Supply Needed for USB Operation
Modbus/TCP Supported in Hardware
Drivers Available for Windows, Linux, Mac and Pocket PC
Examples Available for C/C++, VB, LabVIEW, Java, and More
Includes USB and Ethernet Cable, Power Supply, and Screwdriver
Universal Power Supply with Clips (Australia, Europe, UK, USA)
Free Firmware Upgrades
Money Back Guarantee
Enclosure Size Approximately 3" x 7" x 1" (75mm x 185mm x 30mm)
Rated for Industrial Temperature Range (-40 to +85 Degrees C)
For more technical specifications look at the UE9's datasheet.
Package Contents
UE9 (-Pro) unit itself in red enclosure
USB cable (6 ft / 1.8 m)
Ethernet Cable (6ft / 1.8m)
5V power supply
Screwdriver
Other package details: No software CD included. Download the software from labjack.com.
