The VEEK-MT2S Development Kit is a comprehensive embedded design environment with everything  developers need to create processing-based systems. The VEEK-MT2S delivers an integrated platform including hardware, design tools, and reference designs for developing embedded software and hardware platforms in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT2S features a DE10-Standard development board targeting Intel Cyclone^® V SX SoC FPGA, as well as a capacitive LCD multimedia color touch panel which supports 5-point multi-touch and gestures.

The all-in-one embedded solution offered on the VEEK-MT2S, in combination with LCD touch panel and digital image module, provides developers the ideal platform for multimedia applications with unparallel processing performance. Developers can benefit from the use of FPGA-based embedded processing system utilizing mitigating design risk and obsolescence, design reuse, reducing bill of material (BOM) costs by integrating powerful graphics engines within the FPGA.

Please refer to the VEEK-MT2S Control Panel for SoC reference design in Linux touch-screen display.

Component Solution for Altera FPGAs

＊ Clock Solution		＊  Power Solution,  ADC, Video, Accelerometer and Reset Generator Solution		＊ Ethernet Solution		＊ SDRAM Memory Solution
＊ Capacitive Component Solution		＊ Inductive Component Solution

DE10-Standard Development Board

Cyclone V SX SoC—5CSXFC6D6F31C6N

• Dual-core ARM Cortex-A9 (HPS)

• 110K programmable logic elements

• 5,761 Kbits embedded memory

• 6 fractional PLLs

• 2 hard memory controllers

Configuration Sources

• Serial configuration device – EPCS128 for the FPGA

• On-board USB Blaster II (normal type B USB connector)

Memory Device

• 64MB (32Mx16) SDRAM for the FPGA

• 1GB (2x256MBx16) DDR3 SDRAM for the HPS

• microSD card socket for the HPS

Peripherals

• Two USB 2.0 Host Ports (ULPI interface with USB type A connector) on HPS

• UART to USB (USB Mini B connector)

• 10/100/1000 Ethernet

• PS/2 mouse/keyboard

• IR emitter/receiver

• I2C multiplexer

Connectors

• One HSMC expansion header (used for MTLC2)

• One 40-pin expansion header

• One 10-pin ADC input header

• One LTC connector (one Serial Peripheral Interface (SPI) master ,one I2C bus, and one GPIO interface)

Display

• 24-bit VGA DAC

• 128x64 dots LCD Module with Backlight on HPS

Audio

• 24-bit CODEC, Line-in, line-out, and microphone-in jacks

Video Input

• TV decoder (NTSC/PAL/SECAM) and Video-in connector

ADC

• Sample rate: 500 KSPS

• Channel number: 8

• Resolution: 12 bits

• Analog input range : 0 ~ 4.096 V

Switches, Buttons and LEDs

• 5 user keys (4 for the FPGA and 1 for the HPS)

• 10 user switches for the FPGA

• 11 user LEDs (10 for the FPGA and 1 for the HPS)

• 2 HPS reset buttons (HPS_RESET_n and HPS_WARM_RST_n)

• Six 7-segment displays

Sensors

• G-Sensor on HPS

Power

• 12V DC input

Capacitive Multi-touch Screen Module

LCD Display

• 7-inch TFT LCD with pixel resolution of 800*480

• 16 million colors (8-bit RGB)

• LED backlight

Capacitive Multi-Touch

• Five points multi-touch

• I2C interface

• Gesture supporting

Gesture Table

• One Point

 

• Two-Point

8-Megapixel Digital Image Sensor

• 3,264H x 2,448V active pixels with Bayer color arrangement

• Sensitivity 940mV/Lux-sec

• Gesture supporting

Ambient Light Sensor

• Precise illumination measurement under diverse lighting conditions

• Programmable interrupts

• 16-bit digital output with I2C fast-mode at 400 kHz

• Programmable analog gain and Integration time

• 50/60Hz lighting ripple rejection

MPU9250 Accelerometer Features

• Digital-output triple-axis accelerometer

• Programmable full scale range of ±2g, ±4g, ±8g and ±16g and integrated 16-bit

• Self-test

MPU9250 Gyroscope Features

• Digital-output X-, Y-, and Z-Axis angular rate sensors

• User-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs

• Self-test

MPU9250 Magnetometer Features

• 3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator
• Wide dynamic measurement range and high resolution with lower current consumptions
• Output data resolution of 14 bit (0.6μT/LSB) or 16 bit (15μT/LSB)
• Full scale measurement range is ±4800μT
• Magnetometer normal operating current: 280μA at 8Hz repetition rate
• Self-test function with internal magnetic source to confirm magnetic sensor operation on end products

1. VEEK-MT2S Kit
2. VEEK-MT2S Quick Start Guide
3. microSD Adapter
4. microSD Card (Pre-programmed & Installed)
5. Card Reader
6. IR Remote Control 
7. Type A to Mini-B USB Cable
8. Type A to B USB Cable
9. Power DC Adapter (12V)